RSS
 

I’ve Purchased My Own Cisco 887-AdvK9

16 May

image

Yay!! I finally own one for myself. Good old eBay got me a bargain,  This 877 and a 837 for $280 (including postage) not bad seeing the 877 sell for over $1000 new.  I think the market is getting flooded with these now, as ebay have them for around this price almost all the time now.

I’ve got it to a super stable connection now.  I needed to phone amnet and get my port slowed down, looks like my cheap modem would just settle at a slow speed and would be happy.  Where as the cisco would push for high speed until it started losing packets, but wouldn’t reset.

So I was getting the below errors
*Mar 13 11:21:34.008: atmsar_vc_tx_start(8272D204).
*Mar 13 11:21:34.008: ATM0:atmsar_dequeue_pak, dequeued a pak = 0x82330F70
*Mar 13 11:21:34.008: atmsar_transmit_pak_wrapper: deq(82330F70). vcd: 1.atmsar_transmit_pak_wrapper : encap = Data
*Mar 13 11:21:34.032: ATM0:atmsar_dequeue_pak, dequeued a pak = 0x825E1234
*Mar 13 11:21:34.032: atmsar_transmit_pak_wrapper: deq(825E1234). vcd: 1.atmsar_transmit_pak_wrapper : encap = Data
*Mar 13 11:21:34.036: ATM0:atmsar_dequeue_pak, dequeued a pak = 0x825E2418
*Mar 13 11:21:34.036: atmsar_transmit_pak_wrapper: deq(825E2418). vcd: 1.atmsar_transmit_pak_wrapper : encap = Data

So I was a bit worried for a while that I had brought a dud.  But everything is looking good now.  I’m going to have a bit more of a play with my config then I will post it so every one will know what settings work perfectly on the amnet network.

Goes well with my Cisco WAP4410N wireless access point doesn’t it.

 
No Comments

Posted in Hardware

 

Leave a Reply