Setup a Cisco Router on Amnet ADSL (Bridge Mode)

Here something I’ve been playing a lot with at the moment, I have learnt to love the Cisco iOS. I feel it’s setup better than linux (keeping in mind linux is built on hundreds of seperate programs)

At the bottom is the config I used / am using. But first I will explain what hardware I’m using.  I have got a 800 series cisco router, the thing is, it’s a work hand me down.  Therefore it doesn’t have a POTS port.  So this makes my config different but still usable for anyone with.  OK so below is a picture of what is connected to what.

As you can see the ADSL modem is between Amnet and my router.  It is configured in Pure Bridge mode, which basicly pases ethernet straight to the router.  From here the router still needs to connect by PPPOE to Amnet.  A very good reason for doing it this way.  It bypasses any firewalls on the modem and the outside IP address is applied directly to the dialer0 interface.  This gives you full control to allow the iOS to do what ever you want.

Here is my config of how I got it to work.  Keep in mind to edit the config (change the {string} lines) before pasting this into a configure terminal prompt, and remember to copy running-config startup-config when your done, working and happy.

no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname {router-name}
!
boot-start-marker
boot-end-marker
!
enable secret {enable-password}
!
no aaa new-model
!
!
dot11 syslog
ip source-route
!
!
ip cef
ip domain lookup source-interface Dialer0
ip domain name {local-domain-name}
ip name-server {local-dns-server or 203.161.127.1 and/or 203.153.224.42}
!
!
vpdn enable
!
vpdn-group pppoe
l2tp tunnel timeout no-session 15
!
!
!
username {username} privilege 15 secret (user-password}
!
!
ip ssh version 2
!
!
!
!
!
!
!
interface FastEthernet0
description Connected to Switch
no shutdown
!
interface FastEthernet1
shutdown
!
interface FastEthernet2
shutdown
!
interface FastEthernet3
shutdown
!
interface FastEthernet4
description Connected to Billon 7300A (in bridge mode)
ip address 172.17.1.2 255.255.255.252
duplex auto
speed auto
pppoe-client dial-pool-number 1
hold-queue 224 in
no shutdown
!
interface Vlan1
ip address 172.17.2.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface Dialer0
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
ppp authentication chap callin
ppp chap hostname {amnet-username}@amnet
ppp chap password {amnet-password}
!
ip forward-protocol nd
no ip http server
no ip http secure-server
!
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static tcp 172.17.2.{host} 80 interface Dialer0 80
ip nat inside source static tcp 172.17.2.{host} 443 interface Dialer0 443
{add in any more port forwards you want applied here with the above syntax}
ip default-network 172.17.1.1
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 172.17.1.0 255.255.255.252 172.17.1.1
!
access-list 1 permit 172.17.2.0 0.0.0.255
access-list 1 permit 172.17.1.0 0.0.0.3
!
!
!
!
control-plane
!
banner motd ^CC
**************************************************
*      Access to authorized personnel only       *
**************************************************^C
!
line con 0
exec-timeout 30 0
password {console-password}
logging synchronous
login
no modem enable
line aux 0
line vty 0 4
exec-timeout 30 0
password {remote-password}
logging synchronous
login local
transport input ssh
!
scheduler max-task-time 5000
end

2 comments

  1. Oh also, I run a windows server dhcp client for local ip assignment. If your wanting the cisco to issue ip’s paste the following into it.

    I’ve not tested this config.

    ip subnet-zero
    ip dhcp excluded-address 172.17.2.0 172.17.2.50
    !
    ip dhcp pool dhcp
    network 172.17.2.0 255.255.255.0
    domain-name amnet.net.au
    dns-server 203.161.127.1 203.153.224.41
    default-router 172.17.2.1

  2. The other config you need for a POTS port is
    interface ATM0
    no ip address
    no atm ilmi-keepalive
    dsl operating-mode auto
    no shutdown
    !
    interface ATM0.1 point-to-point
    description PPPOE WAN Interface
    pvc 8/35
    pppoe-client dial-pool-number 1
    no shutdown

    Once again it’s not tested as I don’t have the hardware, but it should work.

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.